Through the hole plug oil process is one of the hole treatment methods, the first is to opaque, above must have ink cover, plugging; The second is the hole can not appear yellow phenomenon, and do not touch tin.
PCB board surface bubbling may be the problem of poor binding force on the board surface, and then extension is the surface quality of the board.
The crystal vibration does not vibrate during product debugging, which may be due to the crystal vibration device itself or PCB design.
Board bubbling is one of the most common quality defects in PCB production. Because of the complexity of PCB production process and process maintenance, especially in chemical wet treatment, it is difficult to prevent board bubbling defects.
After years of development, the PCB industry has also extensively upgraded its processes and capabilities. Some PCBS that were previously considered exotic will soon be considered routine.
The abnormal quality of PCB board will cause direct losses to customers and PCB manufacturers. The loss of copper wire is one of the abnormal quality phenomena, but this kind of abnormal will cause greater losses to PCB manufacturers.
The PCB industry has been shifting its focus to Asia, gradually forming a new pattern with Asia as the center and other regions as the auxiliary. The Asian continent has become the main production base of PCB and its high-end products HDI in the world.
Many microelectronic devices (such as accelerometers, gyroscopes, deep ultraviolet leds, etc.) chips are very sensitive to air, moisture, dust, etc.
Factors affecting PCB welding quality from PCB design to the completion of all components welding into a high quality circuit board, PCB design engineers and even the level of welding process, welding workers and many other links need to have strict contr
Factors affecting PCB welding quality from PCB design to the completion of all components welding into a high quality circuit board, PCB design engineers and even the level of welding process, welding workers and many other links need to have strict contr
For electronic equipment, a certain amount of heat will be generated when working. If the heat is not dissipated in time, the equipment will continue to heat up, and the devices will fail due to overheating.
Layout is divided into two ways, one is interactive layout, the other is automatic layout, is generally adjusted on the basis of automatic layout with interactive layout, in the layout can be redistributed according to the situation of the line, the two g
