Control welding temperature and time: In the welding process of the PCB board, the welding temperature and time should be controlled to avoid excessive heating or heating time is too long, resulting in bending or warping of the plate
Easy to manage circuit board components For a large led circuit board, it has a lot of parts package, there are thousands of networks, very messy, the use of the class can be very convenient to manage the circuit board.
The method of baking board is: conditional PCB factory is to use a large oven baking board. Before putting into operation, a large stack of copper clad plates is sent into the oven, and the copper clad plates are baked for several hours to ten hours at a
The mobile power supply plays a role of small body and large function, which needs to be regulated by a special circuit through voltage conversion to achieve charging support for special products.
The frequency of the digital circuit is high, the sensitivity of the analog circuit is strong, for the signal line, the high-frequency signal line is as far away from the sensitive analog circuit device as possible, for the ground line, the whole PCB has
With the development of the production of printed led circuit boards in the direction of high precision and high density, the production of printed boards is more energy saving, emission reduction and environmental protection.
Anti-static SMT loading and unloading rack has been introduced to you before, it is specially used for automatic loading machine, specifications and styles are generally universal.
Maintenance of spare printed circuit board. For the spare printed circuit board that has been purchased, it should be installed on the numerical control device regularly and run for a period of time to prevent damage;
our PCB copying board research in the field of industrial robots needs to get rid of the drawbacks of traditional technology cloning, increase independent research and development efforts, take the international core technology as a reference for PCB revi
found a short circuit phenomenon. Take a board to cut the line (especially suitable for single/double board), after cutting the line, each part of the function block is powered separately, and gradually eliminated.
In principle, right-angle wiring will cause the line width of the transmission line to change, resulting in impedance discontinuity. In fact, not only right Angle wiring, ton Angle, acute Angle wiring may cause impedance changes.
In circuit board design, we are usually very concerned about the quality of the signal, but sometimes we usually limit the research on the signal line, and the power and ground as the ambition of the situation to deal with, although this can make the ques
Telegram