Copper Clad Laminate, referred to as CCL, is a common base material, usually used in the manufacture of printed circuit boards (Printed Circuit Board, referred to as PCB).
The significance of copper coating is to reduce the ground impedance and improve the anti-interference ability. Reduce voltage drop, improve power efficiency.
At present, with the development of printed circuit boards in the direction of high density and high precision, more stringent requirements have been put forward for copper sulfate plating process.
The negative film is used for direct etching, and the corrosion resistance left after development is a circuit, which is etched directly with acid etching solution.
When the production of laminate using copper foil and the resin system does not match, resulting in sheet metal foil peeling strength is not enough, plug-in will also appear bad copper wire shedding.
The grounding isolation belt near the crystal oscillator must be well grounded. In a word: the copper coating on PCB, if the grounding problem is handled well, is certainly "more advantages than disadvantages", it can reduce the signal line back...
PCB copper coating should pay attention to those problems? How to choose solid copper and grid copper?
the copper coating on PCB, if the grounding problem is handled well, is certainly "more advantages than disadvantages", it can reduce the signal line backflow area, reduce the signal external electromagnetic interference.
Copper coating on PCB, if the grounding problem is handled well, is "more advantages than disadvantages", it can reduce the signal line backflow area, reduce the signal external electromagnetic interference.
A persistent semiconductor shortage is rapidly snowballing into a full-blown component shortage, underscoring the fragility of the current supply chain.
Printed circuit board PCB copper wire off bad, PCB factories are said to be laminate problems, requiring its production factory to bear bad losses.
According to the activity of flux, it can be divided into active (RA), medium active (RMA), inactive (R), water washing (OA), no cleaning (NC)
Kingford is a PCB company engaged in the production and assembly of circuit boards. We not only sell PCBA, but also have many strategies related to PCB design and PCB proofing. Next, let me introduce you to some matters related to PCB.