From the welding point of view, what problems should
Red is not recommended. The red circuit board is white under the red light source of the chip camera...
Red is not recommended. The red circuit board is white under the red light source of the chip camera...
It has been measured that a pass hole can bring about 0.5pf of distributed capacitance, resulting in...
Cross-segmentation may not be relevant for low-speed signals, but in high-speed digital signal syste...
high temperature performance is good: most of today's SMT circuit boards need to install components ...
small aperture: most of the metallized holes in SMT are not used to insert component pins, and are n...
Control welding temperature: Reasonable control of welding temperature can avoid the formation of bu...
Accumulated service for thousands of electronic enterprises, involving many types of automotive equi...
To mitigate this impact, manufacturers often take various measures, such as placing components in co...
Control welding temperature and time: In the welding process of the PCB board, the welding temperatu...
Manual cleaning method is one of the simplest and most primitive methods to remove excess tin residu...
Solvent cleaning is a commonly used method to remove excess tin residue. It is mainly through chemic...
Improper temperature control: If the temperature is insufficient, the solder will not be completely ...