Driver Through Hole PCB Assembly

       A driver broadly refers to the drive hardware that drives a certain type of device. In computing, a drive refers to a disk drive. A storage area formatted with a file system and assigned a drive letter. The storage area can be a floppy disk, CD, hard disk, or other type of disk. Click the corresponding icon in Windows Explorer or My Computer to view the contents of the drive. In the whole control link, the driver is just in the middle of the main control box --> driver --> motor.

      The main function is to receive the signal from the main control box, then process the signal and transfer it to the motor and the sensor related to the motor, and feed back the working condition of the motor to the main control box.

The main function

      Receive the signal from the main control box, then process the signal and transfer it to the motor and the sensor related to the motor.

Brief introduction

       If you want to understand the information in the floppy disk and CD, you must insert them into the floppy disk drive and CD drive respectively, so that the computer can identify and process the above data information.

      Both the floppy disk drive and CD-ROM drive are located in the case, only their "mouths" are exposed, ready to "eat" floppy disks and CD-ROMs at any time.

      As for the hard disk, since it is immovable, it is fixed in the drive, that is to say, the hard disk and the hard disk drive are integrated. Pay attention to the direction when inserting the floppy disk into the floppy disk drive. When inserting the 3.5-inch disk, the shaft should face down and the metal sheet should face forward. When you hear the pop-up button "click" below the drive port, it means the floppy disk is inserted.

      When taking it out, you should press the eject button first, a part of the floppy disk will automatically eject, and then pull out the floppy disk. Nowadays, fewer and fewer people use 5.2-inch disks, and 5.2-inch floppy disk drives are rarely installed on computers. It is worth noting that there is a small indicator light above or below the floppy disk drive. When the indicator light is on, it means that the computer is reading or writing the floppy disk in this drive. The indicator light of the hard disk drive is also located on the front panel of the main chassis, indicating When the light is on, it indicates that the computer is reading or writing to the hard disk.

      When the drive indicator light is on, do not take out the floppy disk in the corresponding drive or shut down the computer, otherwise the disk may be damaged.

      A computer may have more than one floppy and hard drive, how to distinguish them? We take the approach of naming the drive. The names of the drives are all represented by a single English letter, A and B are used to represent the floppy disk drive, C, D, and E are used to represent the hard disk drive, and the CD-ROM drive is generally represented by the letter H. In this way, there is what we often say "Drive A, Drive B, Drive C, and Drive D". Each computer generally has only one CD-ROM drive, so it is often referred to simply as "CD-ROM drive".

Basic function

     In the whole control link, the driver is just in the middle of the main control box  --> driver --> motor. Its main function is to receive the signal from the main control box (NC CARD), then process the signal and then transfer it to the motor and the sensor related to the motor, and feed back the working condition of the motor to the main control box.

Type letter

     Disk A Type: 5.2-inch floppy disk Volume label: 5.2 floppy disk Icon: Lost 3.5-inch floppy disk Volume label: 3.5 floppy disk Icon: See the first row of icons

Disk B Type: 3.5-inch floppy disk Volume label: 3.5 floppy disk Icon: see the first row of icons

C disk-Z disk Type: If there are 5 hard disks, they are CDEFG, optical drive is H, and removable disk is I-Z

     We support driver through-hole PCB assembly business, Kingford is a professional one-stop PCBA service factory, welcome to place an order.