what we do
-
PCB Assembly
Trusted PCB assembly experience with over 20 years.
One-stop solution for OEM, PCBA and turnkey Assembly
Fast Prototype PCB Assembly within 7days
6 Yamaha SMT lines + 2 Thru-Hole Assembly lines -
pcb layout
30+ PCB Layout Engineers
Max Layer No.:40, Max Signal Speed: 56G
Min gap of BGA PIN:0.3mm, Min L/S: 3/3mils
Max Pin Qty: 160000+, Max BGA Qty: 60+ -
DFM Service
Intelligent System for 3D DFA/DFM Solution
3 Minutes Identify Issues on PCBA prior to Production.
Providing Comprehensive 3D DFA/DFM Reports
Support CAD/Gerber Data Source -
Pcb Fabrication
Trusted experience with over 20 years.
High Mix, Low-Middle Volume PCB up to 60 Layers
Multi-layer,HDI, Microwave, Metal Core PCB
Quality Certificates with ISO 13485 and IATF 16949 -
PARTS MANAGEMENT
Database links with 1000+ official suppliers
100% original new and traceable
Sourcing to 5,000,000+ components
Rigorous incoming inspection and quality control -
Functional Testing
Design & supply automatic test jig/fixtures
"AOI inspection, X-ray inspection,ICT testing ,
FCT testing, burn-in testing"
Testing record & results are traceable
who is kingford
● 2018—Opening of Shenzhen PCBA & Turnkey manufactoring factory.
● 2016—Opening of Hubei PCBA & Turnkey manufacturing factory.
● 2012—Expanding business to PCBA & Turnkey manufacturing.
● 2009—Opening of Meizhou aluminum pcb fabrication factory.
● 2005—Achieved Certifications of IATF16949, ISO13485, ISO9001, ISO14001, UL，IPC.
● 2004—Opening of Kingford PCB factory- (Well-tech) in Huizhou.
● 1999—Established Kingford Technology.
Quality is one of our top priorities.
Continuously improve the management level to make customers rest assured.
Strictly control in accordance with IPC standards to ensure 100% qualified rate of shipment quality.
√ ISO 9001:2015 √ ISO 14001:2015
Vision:
To be a trusted friend of global customers.
To deliver maximum value for customers, employees and shareholders.
Mission:
To provide high-quality, timely and satisfactory services for PCB manufacturing and assembly.
Quality is one of our top priorities.
Continuously improve the management level to make customers rest assured.
Strictly control in accordance with IPC standards to ensure 100% qualified rate of shipment quality.
√ ISO 9001:2015 √ ISO 14001:2015
Vision:
To be a trusted friend of global customers.
To deliver maximum value for customers, employees and shareholders.
Mission:
To provide high-quality, timely and satisfactory services for PCB manufacturing and assembly.
which industry we work for
Kingford support customers and provide them with full-service solutions for the entire product lifecycle of electronic components and systems. We have all the necessary skills and expertise to advise customers on technology management issues, ranging from the inception of the product design phase up to and including the end-of-life phase of a product; and we do so on the basis of the best total cost of ownership principle.
how we do
-
News
How to Celebrate Employee Birthdays in KINGFORD
-
PCBA
-
What is ESD protection in integrated circuits and How to protect it?
Abstract: A lot of static electricity problems are caused by people...
-
What is PCB Assembly appearance inspection standard?
Table of Contents 1.Purpose 2. Scope of application 3. Reference st...
-
The briefly introduction to reflow soldering
Reflow soldering by remelting the paste solder pre-distributed on t...
-
-
PCB
-
Special surface treatment process for Printed Circuit Board
Peelable blue mask Peelable blue mask refers to the process of prin...
-
Five common Surface Treatment for Printed Circuit Board
Electroless nickel immersion gold（ENIG） Chemical nickel gold, als...
-
How to prevent PCB bending and warping during reflow soldering
Everyone knows how to prevent PCB bending and board warping from go...
-
-
DFM
-
What principles should be observed in DFM service analysis？
1 | Processing The selected manufacturing process must be the corre...
-
Factors influencing DFM analysis and how to solve them.
The goal of DFM is to reduce manufacturing costs without compromisi...
-
What is Design for Manufacturing in PCB Assembly?
Introduction i. Design for Manufacturing: Today, organizatio...
-
testimonial
-
More than once we ordered the assembly of printed circuit boards from the KINGFORD Installation of smd and dip. Every time we received excellent quality boards. There was never a marriage. It is especially pleasant that the order was always fulfilled on time. Everything is on time, and therefore your deadlines do not have to be postponed
-Madison -
Choosing a contractor, we focused on the experience and professionalism of our future partner. KINGFORD has fully met our expectations in organizing the purchase of components, production and assembly of printed circuit boards. We hope for further fruitful cooperation!
-Andrew
